Photoinduced electron transfer between a noble-metal-free [Mo6I8Cl6]2- cluster and polyoxometalates.

Evidence for photoinduced intermolecular electron transfer from the excited state of the [Mo6I8Cl6]2- electron-rich cluster to polyoxometalates (POMs) is reported. We demonstrate that the global charge density of POMs affects the efficiency of electron transfer. This work paves the way for the rational design of photocatalytic systems using cluster-based complexes as robust noble-metal-free photosensitizers.

Electron-induced fragmentation mechanisms in organic monomers and their implications for photoresist optimization for EUV lithography.

Secondary electrons generated during the Extreme Ultraviolet Lithography (EUVL) process are predominantly responsible for inducing important patterning chemistry in photoresist films. Therefore, it is crucial to understand the electron-induced fragmentation mechanisms involved in EUV-resist systems to improve their patterning performance. To facilitate this understanding, mechanistic studies were carried out on simple organic EUV-resist monomers, methyl isobutyrate (MIB) and methacrylic acid (MAA), both in the condensed and gas phases. Electron-stimulated desorption (ESD) studies on MIB in the condensed phase showed desorption peaks at around 2 and 9 eV electron energies. The gas-phase study on MIB showed that the monomer followed the dissociative ionization (DI) fragmentation pathway, under single collision conditions, which opened up at electron energies above about 11 eV. No signs of dissociative electron attachment (DEA) were detected for MIB in the gas phase under single collision conditions. However, DEA was an active process in MAA in the gas phase under single collision conditions at around 2 eV, showing that slight modifications of the molecular structures of photoresists may serve to sensitize them to certain electron-induced processes.

Strain relaxation and epitaxial relationship of perylene overlayer on Ag(110).

We present a room temperature STM study of perylene self-assembly on Ag(110) beyond the monolayer coverage regime. Coupling of the perylene aromatic boards yields π-π bonded stacks. The perylene stacks self-assemble into a continuous three-dimensional epitaxial overlayer of (3 × 5) symmetry. The self-assembly is driven by thermodynamic balance established under coupling of the intra- and intermolecular interactions and the molecule-substrate interaction all accommodating the short-range thermal motion of the constituent molecules. The balance bestows to the overlayer the unique ability to accommodate the underlying substrate morphology and to spread over the surface steps as a single structure preserving its lateral order and keeping epitaxial relationship with every surface terrace. The complete epitaxy is driven by (i) anchoring of half of the perylene stacks into specific adsorption sites on each terrace, (ii) interlacing of the perylene stacks across the steps within the entire H-bonded network, and (iii) relaxation of the overlayer strain via enhancement of the overlayer-specific vibrational modes and short-range thermal motion of the constituent molecules. This complete epitaxy phenomenon is described via (i) structural and statistical analysis of the molecularly resolved STM topographies, (ii) monitoring of the short-range molecular displacements under the strain relaxation, (iii) highlighting of specific intra-molecular and inter-molecular vibration modes through detailed analysis of HREELS spectra, and (iv) parametrization of the intermolecular interaction via pair potential calculation.

Response under low-energy electron irradiation of a thin film of a potential copper precursor for focused electron beam induced deposition (FEBID).

Background: Focused electron beam induced deposition (FEBID) allows for the deposition of free standing material within nanometre sizes. The improvement of the technique needs a combination of new precursors and optimized irradiation strategies to achieve a controlled fragmentation of the precursor for leaving deposited material of desired composition. Here a new class of copper precursors is studied following an approach that probes some surface processes involved in the fragmentation of precursors. We use complexes of copper(II) with amines and perfluorinated carboxylate ligands that are solid and stable under ambient conditions. They are directly deposited on the surface for studying the fragmentation with surface science tools. Results: Infrared spectroscopy and high-resolution electron energy loss spectroscopy (HREELS) are combined to show that the precursor is able to spontaneously lose amine ligands under vacuum. This loss can be enhanced by mild heating. The combination of mass spectrometry and low-energy electron irradiation (0-15 eV) shows that full amine ligands can be released upon irradiation, and that fragmentation of the perfluorinated ligands is induced by electrons of energy as low as 1.5 eV. Finally, the cross section for this process is estimated from the temporal evolution in the experiments on electron-stimulated desorption (ESD). Conclusion: The release of full ligands under high vacuum and by electron irradiation, and the cross section measured here for ligands fragmentation allow one to envisage the use of the two precursors for FEBID studies.

Electron Processing at 50 eV of Terphenylthiol Self-Assembled Monolayers: Contributions of Primary and Secondary Electrons.

Aromatic self-assembled monolayers (SAMs) can serve as platforms for development of supramolecular assemblies driven by surface templates. For many applications, electron processing is used to locally reinforce the layer. To achieve better control of the irradiation step, chemical transformations induced by electron impact at 50 eV of terphenylthiol SAMs are studied, with these SAMs serving as model aromatic SAMs. High-resolution electron energy loss spectroscopy (HREELS) and electron-stimulated desorption (ESD) of neutral fragment measurements are combined to investigate electron-induced chemical transformation of the layer. The decrease of the CH stretching HREELS signature is mainly attributed to dehydrogenation, without a noticeable hybridization change of the hydrogenated carbon centers. Its evolution as a function of the irradiation dose gives an estimate of the effective hydrogen content loss cross-section, σ = 2.7-4.7 × 10(-17) cm(2). Electron impact ionization is the major primary mechanism involved, with the impact electronic excitation contributing only marginally. Therefore, special attention is given to the contribution of the low-energy secondary electrons to the induced chemistry. The effective cross-section related to dissociative secondary electron attachment at 6 eV is estimated to be 1 order of magnitude smaller. The 1 eV electrons do not induce significant chemical modification for a 2.5 mC cm(-2) dose, excluding their contribution.

UPS, XPS, and NEXAFS study of self-assembly of standing 1,4-benzenedimethanethiol SAMs on gold.

We report a study of the self-assembly of 1,4-benzenedimethanethiol monolayers on gold formed in n-hexane solution held at 60 °C for 30 min and in dark conditions. The valence band characteristics, the thickness of the layer, and the orientation of the molecules were analyzed at a synchrotron using high resolution photoelectron spectroscopy and near edge X-ray adsorption spectroscopy. These measurements unambiguously attest the formation of a single layer with molecules arranged in the upright position and presenting a free -SH group at the outer interface. Near edge X-ray absorption fine structure (NEXAFS) measurements suggest that the molecular axis is oriented at 24° with respect to the surface normal. In addition, valence band features could be successfully associated to specific molecular orbital contributions thanks to the comparison with theoretically calculated density of states projected on the different molecular units.

Self-assembly of 1,4-benzenedimethanethiol self-assembled monolayers on gold.

A study of the self-assembly of 1,4-benzenedimethanethiol (BDMT; HS-CH(2)-(C(6)H(4))-CH(2)-SH) monolayers on gold is presented. Self-assembled monolayers (SAMs) are characterized by reflection-absorption infrared spectroscopy (RAIRS), X-ray photoelectron spectroscopy (XPS), and spectroscopic ellipsometry (SE) measurements. The ensemble of measurements consistently shows that well-organized BDMT SAMs, with "standing-up" molecules, can be obtained on high quality gold films with incubation in n-hexane provided that N(2)-degassed solutions are used and all preparation steps are performed at 60 degrees C in the absence of ambient light. SE data indicate that the optical interface properties of the BDMT-Au system are different from those of simple alkanethiol SAMs. A possible mechanism for the formation of the "standing-up" phase from the lying-down phase via a hydrogen exchange reaction involving chemisorbed lying-down and free dithiol molecules is discussed.

Self-assembly of alkanedithiols on Au(111) from solution: effect of chain length and self-assembly conditions.

A comparative study on the adsorption of buthanedithiol (BDT), hexanedithiol (HDT), and nonanedithiol (NDT) on Au(111) from ethanolic and n-hexane solutions and two different preparation procedures is presented. SAM characterization is based on reflection-absorption infrared spectroscopy, electrochemistry, X-ray photoelectron spectroscopy, and time of flight direct recoil spectroscopy. Results indicate that one can obtain a standing-up phase of dithiols and that the amount of the precursor lying-down phase decreases from BDT to NDT, irrespective of the solvent and self-assembly conditions. A good ordering of the hydrocarbon chains in the standing-up configuration is observed for HDT and NDT when the system is prepared in degassed n-hexane with all operations carried out in the dark. Disulfide bridges at the free SH terminal groups are formed for HDT and to a lesser extent for NDT prepared in ethanol in the presence of oxygen, but we found no evidence of ordered multilayer formation in our experiments. No disulfides were observed for BDT that only forms the lying-down phase. Our results demonstrate the key role of the chain length and the procedure (solvent nature and oxygen presence) in controlling the surface structure and chemistry of SAMs dithiols on Au(111).

On the self assembly of short chain alkanedithiols.

A study of the self-assembly of nonane-alkanedithiol monolayers on gold in n-hexane and ethanol solvents is presented. Self-assembled monolayers (SAMs) are characterised by reflection-absorption infrared spectroscopy (RAIRS), sum frequency generation (SFG) and spectroscopic ellipsometry (SE) measurements. Data obtained for alkanethiols SAMs are also shown for comparison. The measurements show that nicely organized HSC9SH SAMs can be obtained in n-hexane provided that N2-degassed solutions are used and all preparation steps are performed in the absence of ambient light. SFG measurements show that these SAMs have free standing SH groups. Use of an un-degassed and/or light-exposed n-hexane solutions leads to a worse layer organization. Preparation in ethanol, even in degassed solutions with processing in the dark, leads to poorly organized layers and no sign of free -SH groups was observed.

FTIR and XPS study of Pt nanoparticle functionalization and interaction with alumina.

Platinum nanoparticles with a mean size of 1.7 nm were synthesized by reduction in sodium acetate solution in 1,2-ethanediol. The particles were then functionalized with dodecylamine, dodecanethiol, and omega-mercapto-undecanoic acid (MUDA). Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) showed important variations of the particle surface state with functionalization whereas their structure differs only slightly. Platinum-to-sulfur charge transfer inferred from XPS of thiol-coated particles enabled the identification of the formation of Pt (delta+)-S (delta-) bonds. The native carbon monoxide (CO) at the surface of the particles was a very efficient probe for following the functionalization of the particles by FTIR. The red shift of nu(CO) accounts for the nature of the ligands at the surface of the particles and also for their degree of functionalization. Immobilization on alumina substrates of particles functionalized with MUDA was realized by immersion in colloidal solutions. Free molecules, isolated particles, and aggregates of particles interconnected by hydrogen bonds at the surface of alumina were evidenced by FTIR. With successive washings, the energy variation of the CO stretch of carbon monoxide and of carboxylic acid groups and the relative intensity nu(CH2)/nu(CO) showed that the free molecules are eliminated first, followed by aggregates and less-functionalized particles. Particles presenting a high degree of functionalization by MUDA remain and interact strongly with alumina.

Functionalization of heteropolyanions-osmium and rhenium nitrido derivatives of Keggin- and Dawson-type polyoxotungstates: synthesis, characterization and multinuclear ((183)W, (15)N) NMR, EPR, IR, and UV/Vis fingerprints.

Reaction of K(10)[alpha(2)-P(2)W(17)O(61)] or K(10)[alpha(1)-P(2)W(17)O(61)] or [Bu(4)N][OsCl(4)N] in a water/methanol mixture, and subsequent precipitation with (Bu(4)N)Br provided [alpha(2)-P(2)W(17)O(61){Os(VI)N}](7-) and [alpha(1)-P(2)W(17)O(61){Os(VI)N}](7-) Dawson structures as tetrabutylammonium salts. Reactions of [(Bu(4)N)(4)][alpha-H(3)PW(11)O(39)] with either [ReCl(3)(N(2)Ph(2))(PPh(3))(2)] or [Bu(4)N][ReCl(4)N] are alternatives to the synthesis of [(Bu(4)N)(4)][alpha-PW(11)O(39){Re(VI)N}]. (183)W and (15)N NMR, EPR, IR, and UV-visible spectroscopies and cyclic voltammetry have been used to characterize these compounds and the corresponding [(Bu(4)N)(4)][alpha-PW(11)O(39){Os(VI)N}] Keggin derivative.

Functionalization of polyoxometalates: from Lindqvist to Keggin derivatives. 1. synthesis, solution studies, and spectroscopic and ESI mass spectrometry characterization of the rhenium phenylimido tungstophosphate [PW11O39(ReNC6H5)]4-.

Reaction of [Bu(4)N](4)[H(3)PW(11)O(39)] with [Re(NPh)Cl(3)(PPh(3))(2)], in acetonitrile and in the presence of NEt(3), provided the first Keggin-type organoimido derivative [Bu(4)N](4)[PW(11)O(39)(ReNPh)] (Ph = C(6)H(5)) (1). The functionalization was clearly demonstrated by various techniques including (1)H and (14)N NMR, electrochemistry, and ESI mass spectrometry. Conditions for the formation of 1 are also discussed.

Functionalized heteropolyanions: high-valent metal nitrido fragments incorporated into a Keggin polyoxometalate structure.

Three examples of nitrido-functionalized polyoxometalate species are reported, namely (n-Bu4N)4[PW11O39(OsN)] (1), (n-Bu4N)4[PW11O39(ReN)] (2), and (n-Bu4N)3[PW11O39(ReN)] (3), which feature the incorporation of [OsVI identical to N]3+, [ReVI identical to N]3+ and [ReVII identical to N]4+ fragments, respectively, into the framework of a Keggin-type heteropolyanion.